NOVATOP SWP

Description

NOVATOP SWP: three-layer panels are made of coniferous sawnwood dried to 8% (larch 12%). Each layer of the panel consists of lamellas of massive solid wood. The three-layer panel consists of one middle layer rotated by 90° relative to the outer layers. The thickness of the layers can differ and determines the final thickness of the panel. The lamellas of the middle layer are glued longitudinally, and lengthwise they are connected with the butted joint or they can be continuous. Their thickness is a maximum of 42 mm. The outer layers are made of continuous lamellas with a thickness of 6 or 9 mm and a width of 93-143 mm. On every panel, there is always the same width of the surface lamellas whose right side faces the surface. The longitudinal joints of the lamellas are glued together. The adhesive used is waterproof and the surface lamellas are glued according to AW 100, or possibly D4 according to EN 204.
The quality of sanding corresponds to the grain size of 100 (coarser sanding is made to order).

Assortment

Wood: Central European spruce, Nordic spruce, Siberian larch, Silver fir
Standard thicknesses (mm): 14 (4-6-4), 16 (5-6-5),19 (6-7-6), 21 (6-9-6), 27 (6-15-6), 27 (9-9-9), 32 (9-14-9), 42 (9-24-9), 50 (9-32-9), 60 (9-42-9)
Standard widths (mm): 1,040, 1,250, 2,100, 2,500
Standard lengths (mm): 2,500, 2,750, 3,000, 4,000, 5,000, 6,000
Non-standard formats (mm): According to the individual demand
Types of panels: NOVATOP SWP, NOVATOP SWP SD – a panel according to EN 13986, NOVATOP FREE – glued without formaldehyde
Long panels with a continuous surface lamella: Lengths up to 10,000 mm, maximum format of 2,500 x 10,000 mm, thickness 27 (9-9-9), quality: B – C/D
Quality: A, B, C, D and their combinations (Quality sample book). Classification of quality of surface lamellas is conducted according to EN 13017-1 and the internal regulations of AGROP NOVA a.s.

Machining possibilities

Examples of application

Multilayer panels NOVATOP can be machined with all standard woodworking tools and machines as solid wood can. As for the surface finish, all methods used for solid wood are suitable. When used in the outdoor environment, the natural properties of solid wood must be taken into account.
In the building industry
Ceiling and floor structures, load bearing shells of sloping roofs, roof overhangs, cladding, facades, extensions, installations, structures of halls, carpentry structures, etc. Preferred quality: B/C, C/C, C/D.
In carpentry
Wall, ceiling and partition cladding, floors, staircase steps, furniture and interior equipment, door frames, doors, shutters, production of packaging, boxes, etc. Preferred quality: A/B, AB/B, B/B, B/C.